Chroma 61705 Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 12KVA. New in Box.

 

Chroma 61501 Programmable AC Source 0~300V, 15~1kHz / 500VA, 1ø. New in Box.
Chroma 61705 Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 12KVA. New in Box.
 

Features

The Chroma Programmable AC source model 61700 series delivers pure, 5-wire, 3-phase AC power. Unlike the traditional 3-phase AC source, it includes low power rating models at very low cost. Users can program voltage and frequency, measure the critical characteristics of the output on its LCD display. It delivers the right solution to simulate all kinds of input condition of UUT to be utilized in R&D and QA. It is also suitable for commercial applications from laboratory testing to mass productions. The 61700 supplies the output voltage from 0 to 300VAC and it can be set individually for each phase. Users also can set the phase angle from 0° to 360°. These kinds of function make the 61700 series can simulate unbalance 3-phase power. Because of the wide output frequency from 15 to 1200Hz, it is suitable for avionics, marine and military application. The AC+DC mode extends the output function to simulate abnormal situation when power line contains DC offset.

The 61700 series uses the state-of-the-art PWM technology, so it is capable to generate very clean AC output with typical distortion less than 0.3%. With power factor correction circuit, the 61700 series yields higher efficiency and deliver more output power.

By using advanced DSP technology, the 61700 series offers precision and high speed measurements such as RMS voltage, RMS current, true power, power factor, and current crest factor, etc. The 61700 series offers an optional function to output transient voltage. The function includes LIST, PULSE, STEP and NTERHARMONICS mode. Users can easily program variant waveform for immunity test. The 61700 series can also be controlled by a powerful and userfriendly softpanel through GPIB or RS-232 interface. Besides that, the softpanel includes
a waveform editor that can edit up to 40th order harmonic components. By this way, the 61700 series get the ability to output distorted waveform as users like. The self-diagnosis routine and protections against overpower, over current, over voltage, over temperature and fan fail, the 61700 series ensure the quality and reliability for even the most demanding engineering testing and production line application.


1. LCD Display
LCD display shows the setup, operating status and readings

2. Page Up/Down Key
Facilitate parameter data editing

3. Numeric Key
Data entry of test parameters

4. Rotary Knob
Program analog of setting the voltage, frequency and parameter setting

5. Output Enable Key
To enable or disable output

6. Output Indicator
Light on when output is enable

7. Power Switch

8. GPIB Interface

9. RS-232C Interface

10. External V Reference (Reserved)
External programming voltage input

11. System Interface
Use for parallel operation and transient signal

12. Input Terminal
3Ø Y and Δ connecting are suitable

13. Remote Sense Terminal
Use to compensate the line drop between source and testing point

14. Output Terminal
Connect output cable to the UUT

AC OUTPUT RATING

Max. Power

12000VA

Per Phase

4000VA

Voltage

Range

150V/ 300V

Accuracy

0.2%+0.2%F.S

Resolution

0.1V

Distortion

0.3%@50/60Hz, 1.5% 15~1.2K Hz

Line regulation

0.10%

Load regulation

0.20%

Temp. coefficient

0.02% per degree from 25°C

Maximum Current (per phase)

r.m.s.

32A/16A

peak

192A/96A

Frequency

Range

DC, 15~1.2K Hz

Accuracy

0.15%

Phase Angle

Range

0~360°

Resolution

0.3°

Accuracy

< 0.8°@50/60Hz

DC Output Rating (per phase)

Power

2000W

Voltage

212V/424V

Current

16A/8A

INPUT 3-PHASE POWER (per phase)

Voltage range

190~250V

Frequency range

47~63Hz

Current

28A Max.

Power factor

0.98 Min.

MEASUREMENT

Voltage (Line-Neutral)

Range

150V/300V

Accuracy

0.2%+0.2%F.S

Resolution

0.1V

Current (per phase)

Range (peak)

192A

Accuracy (r.m.s.)

0.4%+0.3%F.S.

Accuracy (peak)

0.4%+0.6%F.S.

Resolution

0.01A

Power (per phase)

Accuracy

0.4%+0.4% F.S.

Resolution

0.1W

OTHERS

Efficiency

82%

Size (WxHxD)

483 X 799 X 630 mm

Weight

170kg

Protection

UVP, OCP, OPP, OTP, FAN

Temperature Range

Operation

0°C~40°C

Storage

-40°C~85°C

Humidity

30 %~90 %

Safety & EMC

CE

 

Signal Test, Inc is a USA Corporation based in San Diego, California. Signal Test is a distributor of electronic test equipment. In addition, you can buy and rent used test equipment. If you have any surplus equipment, Signal Test will buy it from you or trade it in. Services include repair, calibration, and sale of replacement parts.

Signal Test has offices in Mexico (Matamoros, Monterrey, Ciudad Juarez, Tijuana, Guadalajara and Mexico City). It also has associates in Europe, Asia, and Latin America.

Our mission is to help you stream line the acquisition of electronic test equipment and services. Please give us a call ! 

instek-Oscilloscopes
 
 

Also Visit:

microohmmeters.com

sorensendcpowersupplies.com

rfvectornetworkanalyzer.com

 

Signal Test
1529 Santiago Ridge Way
San Diego, CA 92154
United States 619.575.1577

 

Please give us a call !   for sales  email:  sales@signaltestinc.com

Thank you for visiting Chroma AC Source